Hello, friends welcome to my blog LearNewAi if you want to set up a static IP address homelab, you’ll need to follow the steps in this article you will know How To Get A Static IP Address Homelabstep-by-step guide.
before starting just take a brief about what is a static IP address, is a specified, permanent IP address transferred to a machine on a network.
if you know about a dynamic IP address it has a property to change during the runtime and is allocated by a DHCP (Dynamic Host Configuration Protocol) server, but a static IP address remains unchanging over time.Ā Ā
if your IP address does not change, it will make your hosting server more reliable.
Also Read: 5StarsStocks Ai New Way To Invest In 2024
How to Get a Static IP Address
- From Your ISP: Reach out to your Internet Service Provider (ISP) and send a request or just raise a ticket to your provider to get a static IP address.
- Home Network Configuration: You can also configure your network to use static IP addresses internally, it does not matter if your IP is dynamic.
How To Get A Static IP Address Homelab?
The first step is to check Your present time Network Configuration
you just find out your existing network settings for the device you want to change a static IP to. you can easily do this in many ways you can use your operating system’s network settings or by using command-line tools.
- Windows: In Windows, you just press the win+r button and Open the Command Prompt, and type ipconfig /all.
- Linux/macOS: in Linux Os open your terminal and type ifconfig or ip a.
Select your IP Address
you just choose your IP address that is beyond your router’s DHCP (Dynamic Host Configuration Protocol) coverage to bypass conflicts. You can find your router’s DHCP range easily in its settings section.
Go To Your Router’s Settings
you just log in to your router’s account. you will get ip address something like 192.168.1.1 or 192.168.0.1. you have to cross-check your IP address from your router manually.
Reserve the IP Address
Now you have to reserve the IP address you have selected for your homelab device in the router’s settings.
- you will get a section like that “DHCP Reservation”, “Static DHCP”, or “IP Reservation”.
- Enter the MAC address of your homelab device and your selected IP address.
- Configure the Device with a Static IP
after all just set your device to get the benefits of the static IP address. you can do this from your device’s network settings:
How To Get A Static IP Address Homelab For Windows
- Go to Settings > Network & Internet > Ethernet (or Wi-Fi if wireless) > Change adapter options.
- Right-click the network connection and select Properties.
- Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Select Use the following IP address and enter the static IP, Subnet mask, and Default gateway.
- Enter the Preferred DNS server (typically your router’s IP).
How To Get A Static IP Address Homelab For Linux
- Open Terminal and edit the network configuration file, typically found at /etc/network/interfaces, or use the Network Manager.
- For /etc/network/interfaces, you might add:
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1
- Restart the network service:
sudo systemctl restart networking
How To Get A Static IP Address Homelab MacOS
- Go to System Preferences > Network.
- Select the active network connection (e.g., Ethernet) and click on the advanced section.
- Go to the TCP/IP tab and set Configure IPv4 to Manually.
- Enter the static IP address, Subnet mask, and Router address.
- Verify the Configuration
After doing this, you have to check whether your setup of the static IP address has been working correctly or not on your device. I hope I have cleared your doubts about How To Get A Static IP Address Homelab this question.